2014-Laser-1.png
VXone
470
Starling
49er
420
FX

    The Bieker Moth – Top 6 at 2021 Moth Worlds!

    "Fast" just got redefined at the 2021 Moth Worlds with the Mackay built Bieker Moth being the choice of boat sailed by the top six.

    Our congratulations to Tom Slingsby showing impressive form to take out this year’s World Championship title with two races to spare. To Iain Jensen and Paul Goodison, 2nd and 3rd place holders, our congratulations to you both too.

    Slingsby sailing to glory.

    As builders of the Bieker Moth, to have the first six boats at these Worlds makes it all the more exciting for our team. This is in a fleet of 138 competitors. Our congratulations to you all.

    The recent 2021 Moth Worlds provided everything a World Championships could ever wish to deliver – top sailors pitting their skills against each other in what is arguably the fastest single-handed boat to ever grace the waters.

    The Bieker Moth was no exception at these Worlds. “The Bieker is hands down the fastest platform as soon as we are in foiling conditions, and we have made huge steps to improve the light air performance and it showed,” says Slingsby.

    If there’s one thing we’ve learnt as boat builders, you simply can’t keep still in this Class. This is a Class that just keeps pushing the performance boundaries further and further every time. And why not - it’s a development Class after all. 

    The recent development of our new “low-drag” verticals (the MV-V3 and RV-V3 models) just before the Worlds gave sailors the added speed needed for early lift off in light airs and easier maneuverability. The defining characteristics of these low-drag verticals was in shortening the length and making them narrower which resulted in reduced area. The result is less drag and weight which in effect makes the boat go faster through the water for the all-important early lift off in light airs. 

    And this showed at the Worlds, “The new verts are way less sticky and boat handling is better. Acceleration out of the tacks is insane,” says Slingsby.

    The introduction of this new foil design also took advantage of the refinements we’ve made to our foil construction process which enables us to produce even more consistent, perfectly shaped foils.

    Future developments: new moulds to focus on the construction process

    We’ve now built close to 50 boats. During this time, we’ve refined the build process and have come to understand that a new hull mould is needed to improve even further our construction process of the Bieker Moth. This improved construction will mean more accurate boats are built. In effect, more accuracy leads to lighter, more consistent boats.

    The new mould will also include a new gantry design and attachment system to further enhance light air performance.

    It’s important to note that this new mould is not changing the current shape of the Bieker Moth.

    However, we will admit that, as this is a development Class, you can be certain we’re forever working hard to give our sailors the edge. And why wouldn't we with the development team behind the Bieker Moth.  This is the team that turns ideas into performance gains for the Bieker Moth  -

    Mackay Boats headed by Dave McDiarmid

    Scott Babbage Project Manager

    Paul Bieker Naval Architect

    Riley Dean Design Engineer

    Leopold Fricke FEA engineer (IXENT)

    Hal Youngren Foil Section Designer

    Nico Rousselon CFD engineer

    C-Tech – Alex Vallings

    James Gell Prototype Boat Builder

    World Sailing Licensed Builder
    Member of NZmarine

    About

    Contact

    Mackay Boats Ltd

    • 24 Manga Rd, Silverdale
    • Auckland, New Zealand
    Mackay Boats are on Facebook