Sailors continue to tell us how much they like the boats from our new moulds.
From Dave Hughes & Stu MacNay -USA
"Stu and I want to thank you for building such an awesome 470!! It is the best 470 the two of us have ever sailed. Stiff, responsive, and fast. The layout is awesome. The details are perfect. We won the US Nationals with speed to spare.
You guys make a wonderful product! Thank you!!!"
Read more below for more information about the new boats.
New Moulds produce the most exciting Mackay 470 ever!
In 2012 the International 470 class decided to introduce measurement at every 500mm station on the hull. Previously the class only measured the boats every 1 meter.
Our initial reaction was of little concern because our boats did in fact already measure at all these new stations (except for 3mm on one gunwale measurement).
However, we then thought OK, this is an opportunity to build the perfect 470 moulds so we decided to re-evaluate our current boats and to build the ultimate 470!
We did not want to change the basic characteristics of the MacKay shape that has been dominating 470 sailing for many years now. But we knew there was room for improvement. Added to that were the advances in technology at our disposal here in Auckland.
The first step was to scan our existing 470 hull. We were lucky to have the services of Form Scan at our disposal. In fact they are the building next to us here in Silverdale. They have the most accurate precision scanning equipment available in the world today. Furthermore we already had considerable experience using the equipment for the mould development of both the 49er and the Mackay 420. We had complete faith in the results. The scan is accurate to 1/100th of a millimetre. (much more accurate than we actually need).
The scan data was loaded into an advanced Hull Design program which produces a surface that we can then evaluate and modify as needed. The key to the success of any such software is the guy who is driving it. We were lucky to again receive the services of Kevin Trotter (naval architect and successful dinghy designer) who had modeled the 49er and 420 for us.
The surface is set up in the program with all the electronic 470 measurement stations also loaded. We were then able to superimpose the existing hull into the measurement model and see where we could achieve better results.
Without changing the characteristics of the shape, we were able to move the hull closer to the tolerances in some key areas and generally refine our current boat.
- For example the waterline beam could be reduced in some areas.
- We could make the shape perfectly fair using the software.
- We could further optimize the planning surfaces of the boat.
- And finally we can easily achieve perfect symmetry from one side to the other.
On paper (or rather on screen) the new model was a significant advancement.
New Mould Technology
Next came the question of how to build moulds to accurately achieve the results we had created with the software?
This is where the spinoffs from the Americas cup can be helpful!
Oracle USA have set up an advanced boat building facility in a town called Warkworth which is only 30 minutes north of our factory. One of their investments is a CNC machine that can cut out a boat up to 40ft long.
We built GRP hull and deck master plugs which they could Machine down to the finished shape with extraordinary accuracy. We simply gave them the computer model we had developed and they cut our hull and deck down to that exact shape.
They start by machining an undersize plug, and then apply an epoxy tooling paste. This is then checked carefully for any voids before being machined to the final shape.
Next came the building of the moulds. We brought the master plugs back to our factory and painted them, polished them, waxed them and then began the process of building a GRP mould over the top of them.
The characteristics of GRP can cause a major problem for a boat builder wishing to build high performance dinghies to tight tolerances. GRP has a certain shrinkage factor. What you start with is not what you end with. There are 3 generations of components between the computer and the finished boat. First is the Plug which is CNC cut. Second is the mould which is laminated in GRP. Third is the production boat which is also laminated in GRP.
So our computer model had to be bigger than what the finished boat would need to be. Our experience with shrinkage in our previous mould building exercises told us exactly how much to allow for.
In the last week of February 2013 International 470 class measurer Jurgen Cluytmans travelled from Belgium to NZ to measure our prototype boat. We are absolutely thrilled by the exactness that we have achieved at the end of this long process. The hull measures with just 1mm to spare at all the critical points. It is really beautiful to look over the hull and see the perfect fairness. The deck to hull glue joint is a perfectly even 1mm all the way around the join (evidence of the accuracy of the process).
Apart from the hull shape there are considerable improvements to the internal measurements of the boat. The symmetry that has been obtained means that everything will line up easily. Shrouds, mast partner, centrecase, jib track leads and mast step all line up perfectly.
The MacKay 470 has always been known for its stiffness and longevity. During this process we discovered some areas where we could make the boat stiffer. The accuracy of the above mentioned deck to hull glue joint allows a stronger joint. The inside face of the side tanks meet the hull at a position further inboard then the existing boat. This gives extra stiffness to the flat sections of the bottom of the boat.
We can’t wait to see the first of our new 2013 470s in action in Europe this year. They can only be faster!
The obvious advantages are that the boat will hold high rig tension and not flex in the bow and mid sections. A significant underlying advantage is that the tune of the boat will not change through a season of racing. It will not go soft (as some boats do) and therefore the rig tensions and mast bends will not alter as the season progresses. The construction techniques we use give greater longevity and therefore eliminate the need to replace the boat every year or two. A good crew can develop the tune of the boat and know that they can keep it for several seasons.
We believe that our construction techniques are as advanced as allowed by the rules. The building process also involves a considerable amount of custom workmanship. All of the ribs on our boats are vacuum clamped foam with chopped mat and uni-directional rovings on top. We obtain extra strength from the rigidity of the foam itself. It is important to realise that we do not "mass produce" the Mackay 470. We concentrate on building fewer boats but of a very high quality. We have placed the greatest importance on workmanship, with care and attention to detail.
International 470 Class History
In 1963, French architect Andre Cornu designed the two-handed centerboard boat as a modern high performance fiberglass planing dinghy which could be sailed by anyone. And the craft so influenced European sailing that the 470 is directly credited with drawing new sailors to the sport during the 1960s and '70s.
An Olympic class boat since 1976, 470s are sailed today for both family recreation and superior competition by more than 30,000 sailors in 42 countries worldwide. The 470 is so popular that its annual World Cup event is considered one of sailing's major international regattas attended by sailors and spectators from around the world.
A light and narrow boat (length 4.7m and beam 1.7m with a weight of 120kg), the 470 responds easily and immediately to body movement. Thus, the sailors' teamwork and tactics complement one another. The skipper is smaller and lighter (1.65m to 1.8m and 55kg to 65kg), and the crew is tall and light (1.75m to 1.85m yet only 65kg -75kg). The crew's build lets him or her hang far out on the trapeze to keep the boat level in all conditions.
In 1988, women officially entered Olympic sailing competition with the first-ever 470 Women's event. This boat is especially well-suited to women's competition because of its light weight, maneuverability and light crew weight requirement.
Click here to view more information on the history of the 470.